Why Your Swim Spa Cover Stinks!

Hey, no offense, but your swim spa cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive substances. Moisture leaks in and ends up being trapped in between the external vinyl shell and the cling wrap foam cores. The warm, moist environment is perfect for mold and mildew and other types of stinky things.
If moisture has actually permeated further into the plastic wrapped foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and stinky slime, however also make the cover really tough to remove, and not as effective at keeping the heat in the spa. Time for a much better type of swim spa cover.

Smelly Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or worn spots, torn seams. A spa cover that loses it’s arched roofing line, to keep water draining pipes off properly, will eventually start to puddle water, which is most likely time to purchase a brand-new swim spa cover! A spa cover with threadbare spots in the vinyl is also problem, and although you can fend off the inevitable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A much better cover can endure longer durations, however it’s a good routine to get rid of the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit wetness to escape do so, however don’t eliminate vulnerable foam panels unless definitely essential.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, but it won’t stop moisture very well. Even the very best foam filled covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a swim spa cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not preserved regularly with sanitizer and filtering, or is not shocked often enough, bacteria and algae can make the most of a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can likewise degrade the underside of your spa cover. Due to the fact that the cover is so near to the spa, it absorbs the chemistry of the spa. Clean, clear and hygienic water is the best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The truth is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times per year, so that it always looks excellent, and is safeguarded from the elements. Again, this really isn’t going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealer pay their bills.

Your Choices

Fix Your Hot Tub Cover!
• Remove to Safe Location: This primary step might appear obvious, but you need a good location to allow the cover to sit undisturbed from pets, wild animals, and winds. It needs to be a bright location if possible, or a dry indoor location with low humidity can likewise be used.
• Deodorize & Disinfect: You may not need to do both, it’s best to be as mild as possible. Don’t use family cleaning products on your spa cover, strange chemicals can wind up in your spa water. Carefully clean all exterior surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be prevented if possible, because the panels could become damaged throughout elimination or cleansing. But if you determine that there is something slimy inside, you can usually unzip and remove the panel for a cleaning inside and out.

How frequently does your spa dealer anticipate you to do all this? If your swim spa is safeguarded from many sun and rain, two times annually. If it’s exposed it ought to be 3-4 times annually. Let that sink in a minute.

Much better Choice
The easiest treatment for a foul-smelling swim spa cover is to simply buy a different type of swim spa cover A stinky swim spa cover just suggests that your cover is taking on moisture, and things are starting to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers rather will prevent providing the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *