Hey, no offense, but your swim spa cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is among nature’s most erosive substances. Moisture leaks in and ends up being trapped between the external vinyl shell and the cling wrap foam cores. The warm, moist environment is best for mold and mildew and other forms of smelly things.
If wetness has penetrated even more into the cling wrap foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and stinky slime, however likewise make the cover really hard to get rid of, and not as reliable at keeping the heat in the spa. Time for a much better type of swim spa cover.
Foul-smelling Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or used spots, torn seams. A spa cover that loses it’s arched roof line, to keep water draining off properly, will ultimately start to puddle water, which is most likely time to buy a brand-new swim spa cover! A spa cover with threadbare areas in the vinyl is likewise bad news, and although you can stave off the unavoidable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A much better cover can withstand longer durations, but it’s a good habit to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to allow wetness to get away do so, but do not get rid of fragile foam panels unless definitely needed.
• Poorly Made. It’s easy to make a swim spa cover with tape and staples, but it won’t stop moisture effectively. Even the very best foam filled covers with vacuum-wrapped and heat welded joint are not going to keep the extreme moisture from your spa from reaching the foam core. The only real service is a swim spa cover uses air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not stunned typically enough, bacteria and algae can make the most of a congenial environment to thrive. Low pH, high chlorine or high ozone levels can also deteriorate the underside of your spa cover. Because the cover is so close to the spa, it takes in the chemistry of the spa. Clean, clear and sanitary water is the best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The reality is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times per year, so that it always looks terrific, and is safeguarded from the aspects. Again, this actually isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealer pay their expenses.
Fix Your Hot Tub Cover!
• Remove to Safe Location: This primary step may appear obvious, however you need an excellent place to allow the cover to sit undisturbed from family pets, wild animals, and winds. It must be a sunny place if possible, or a dry indoor place with low humidity can also be utilized.
• Deodorize & Disinfect: You might not have to do both, it’s best to be as gentle as possible. Don’t use home cleaning products on your spa cover, weird chemicals can end up in your spa water. Gently tidy all outside surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this ought to be prevented if possible, due to the fact that the panels might end up being harmed throughout removal or cleaning. However if you figure out that there is something slimy inside, you can normally unzip and eliminate the panel for a cleansing inside and out.
How typically does your spa dealer anticipate you to do all this? If your swim spa is protected from the majority of sun and rain, twice each year. If it’s out in the open it should be 3-4 times each year. Let that sink in a minute.
Much better Choice
The simplest remedy for a smelly swim spa cover is to just purchase a different sort of swim spa cover A stinky swim spa cover just means that your cover is handling moisture, and things are starting to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers rather will avoid providing the mold and mildew a place to grow in the first place.